Quectel Modules with the KORE Narrowband SIM
Cellular modules covered on this page
Super SIM
If you are looking for information related to using Quectel modules with Super SIM, please see this document.
Firmware updates
Firmware updates for Quectel cellular modules are typically available through Quectel support. Please reach out to your Quectel representative or Quectel Support for assistance with firmware updates.
General getting started information
Please refer to the main Knowlegdebase page for modem-independent configuration tips.
BG96 NB-IoT
Initialization
KORE Narrowband can be made accessible by setting iotopmode to 1: AT+QCFG="iotopmode",1,1.
Operator selection
Calling AT+COPS redundantly can adversely affect connection times. We recommend using automatic operator selection: AT+COPS=0.
Low-power modes
While the BG96 supports low-power modes for eDRX and PSM, support for these features will vary by visited network and location. The commands for each of these settings are:
eDRX:
AT+CEDRXSPSM:
AT+CPSMS
Known issues
1. DNS servers may not be provided by the network with the KORE Narrowband SIM
Modem firmware versions prior to BG96MAR03A06M1G may not receive valid DNS servers upon connection. Affected versions include, but are not limited to, BG96MAR02A06M1G and BG96MAR02A07M1G.
This issue does not impact GSM connections maintained by the Narrowband SIM.
This issue can be observed by connecting to the network and executing the following commands, noting the 0.0.0.0 DNS addresses:
Attempts to resolve a host name to an address will fail:
Recommended solution Update the BG96's firmware to version BG96MAR03A06M1G or above.
Workaround Provide DNS servers manually after connection with the following command:
This example uses Google's DNS servers, but you can use the DNS service of your choice.
Last updated
Was this helpful?